Alert Log; Figure 216: System EventsAlert Events Lists: System Crash; Figure 217: System EventsAlert Log - Grandstream Networks UCM6202 User Manual

4. System Crash
•
Detect Cycle: The UCM will detect the event at each cycle based on the specified time. Users can
enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Click on the switch
could also select the checkbox for each event and then click on button "Alert On", "Alert Off", "Email
Notification On", "Email Notification Off" to control the alert and Email notification configuration.

Alert Log

Under Web GUIMaintenanceSystem EventsAlert Log, system messages from triggered system events
are listed as alert logs. The following screenshot shows system crash alert logs.
User could also filter alert logs by selecting a certain event category, type of alert log, and/or specifying a certain
time period. The matching results will be displayed after clicking on
types by the system:
Figure 216: System EventsAlert Events Lists: System Crash
to turn on/off the alert and Email notification for the event. Users
Figure 217: System EventsAlert Log
UCM6200 Series User Manual
. Alert logs are classified into two
P a g e | 314