Step 2: Enable Alert Notification For Emergency Calls; Figure 3: Alert Contacts Configuration - Grandstream Networks UCM6 Series Manual

After this, users can press the
are valid and working fine.
Notes:
•
Users have the ability also to customize the emails that will be sent by the UCM under the tab
"Email Template" for multiple tasks (Fax Sending, CDR, Alert Events ...etc).
•
Users can check the email send logs under "Email Send Log" tab to view the history of the emails
that where sent by the UCM.

Step 2: Enable Alert notification for Emergency calls.

Next, we need to enable the alert event for the emergency calls as well as email notification
or this type of events. First, make sure to configure the alert contacts under the menu
"Maintenance → System Events → Alert Contact" as shown below.
After this, users need to enable the alert notification for emergency calls under « Alert Events List » tab.
button in order to verify and confirm that the configured email settings

Figure 3: Alert Contacts Configuration

UCM6xxx Emergency Calls Guide
P a g e | 8