Phone Config - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
† Only those 802.11a bands that are available in the selected domain will be listed. See Appendix A for
complete information.
‡ Subbands have not been established for the b and b/g mixed or the g-only mode at this writing.
Provision is made in the software to accommodate these ranges once established. Until added, selecting
either of these two modes will immediately bring up Transmit Power options.

Phone Config

52
Modifications of settings under
reflected in the corresponding settings under
Custom
" " or vice versa. If the configuration is changed from "
Custom
to " " or vice versa, it is recommended to double-check all
settings.
Language
The Language option is available on both the
menus. Select the desired language from the list. The default is
English .
Telephony Protocol
Telephony Protocol lets you select the VoIP protocol that your site is
licensed to download and run. The SIP protocol used for the
SpectraLink 8020/8030 Wireless Telephones requires license option
selection 36 . Any other protocol will cause the handset to
malfunction.
PTT/Emerg. Button
This option appears only on the SpectraLink 8030. The Push-to-talk
button on the left side of the handset may be configured to either
standard PTT functionality or to dial the specified emergency call
number when pressed twice within two seconds. These are mutually
exclusive options. Both are disabled by default.
When using the Handset Administration Tool to configure this
option, ensure the PTT option in the
type is disabled before enabling the
Phone Config tab. When
will be grayed out.
Push-to-talk [Disable/Enable]
on the Config menu for the end user to subscribe to allowed channels,
WLAN Settings
Admin
PTT Admin tab
Emergency Dial
PTT is enabled, the Emergency Dial
– If enabled, the PTT options will appear
CCX
= " " may get
WLAN Settings
=
CCX
"
and Config
under Handset
option in the
option
PN: 1725-36038-001-L.doc