Polycom SpectraLink 8020 Administration Manual page 84

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Softkeys
Softkey Name
<< Cursor backward
>> Cursor forward
Answ Answer
Bksp Backspace
character
Back Back one screen
Dial Dial Call
End End Call
Favr Favorites
Fwd Forward Definition
Logs Call Logs
Hold Hold
Msg Message
Mute Toggle muting
OK OK
Redl Redial
Rej Reject
Appears only if the PROXYn_MAIL_NOTIFY is configured. A message center contact address must be defined for
1
the proxy used by the selected line.
84
Displayed during...
Entering a dial number.
Entering a dial number.
Incoming call on the selected
line.
Entering a dial number.
Displaying a menu.
A dial number is being
entered on the selected line.
An active call on the selected
line.
Prior to entering the first
character of a dial number
Prior to entering the first
character of a dial number.
Standby mode
In an active call.
Initial dial screen when new
line is selected and a dial
tone is active prior to
entering first character of the
1
number to be dialed .
In an active call.
Power up registration if
username is not configured
in Admin menu.
Prior to entering the first
character of a dial number.
Incoming call on the selected
line.
Press to...
Move the cursor back one position.
Move the cursor forward in
alphanumeric mode, if the cursor is
at the end of the line, adds a space
character.
Answer the call (equivalent to START
key).
Delete the character prior to the
cursor position.
Exit the menu.
Initiate a phone call to the entered
dial number.
Terminate the call without going back
to standby mode.
Activate the Favorites menu.
Delete a previously defined forward
destination.
Or initiate definition of a new forward
destination.
Open the Call Log menu.
Place the call on hold. The line status
shows when the call is on hold or
when audio is flowing.
Initiate a call to the specified
message center contact address for
retrieval or administration of
voicemail.
Toggle audio transmission to the far
end. The line status shows
not muted or when muted.
Send the username and password to
the SIP server for authorization to
register the handset.
Redial the last number that was
dialed.
Reject the incoming call. The SIP
server will then redirect the call
PN: 1725-36038-001-L.doc
when