Polycom SpectraLink 8020 Administration Manual page 126

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Parameter
PROXYn_FAILOVER
IP_ADDRESS
AUTH
[see warning note
below]
CODECS
LINEn
LINEn _PROXY
WARNING: providing credentials by using the AUTH parameters in the configuration files is a security risk and
5
should be avoided by entering usernames and passwords in
time. Credentials entered here are in plain text and accessible by anyone who can access the TFTP server files.
Credentials stored in the SIP server or in the handsets are protected.
126
Value
xxx.xxx.xxx.xxx:pppp
or
proxyname:pppp
username;password
codec1, codec2
e.g. g711u, g711a,
g729
username
i
Description
The IP address of the
Interactive Intelligence
failover call server.
Credentials.
In general credentials are
needed for each
5
registered line. .
Comma-separated list of
supported codecs in order
of preference.
The dial # or name.
All LINEn user names
should be unique for a
given LINEn_ PROXY.
This may be enforced in
future software revisions.
SIP proxy server for this
line.
Admin
menu or by allowing the user to login at startup
Notes
n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4
address
pppp = port (optional, 5060
is the default)
proxyname = computer
name (DHCP only)
username = The dial
number or string that
identifies the line
appearance. Generally an
extension or phone
number.
password = a secure
password created by the
system administer which
enables a handset to
register and/or function.
Defaults to "g711u, g711a".
if either is omitted it will be
added to the end of the list.
n = 1, 2, 3, 4, 5
The registered contact
becomes:
sip:username@domain
n = 1, 2, 3, 4, 5
i = the number of the proxy
server 1, 2, 3.
LINEn_PROXY can be
omitted if the line is not to
be registered and you wish
to do direct phone to phone
calls.
PN: 1725-36038-001-L.doc