Menus - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Menus

86
Line menu
The Line menu allows you to activate a call on a selected line or to
view the status of lines.
Pressing the LINE key from the active mode displays a menu of line
appearances as programmed in the SIP TFTP configuration file. The
LINE key can be pressed while the handset is in the standby mode to
activate the handset and to activate a new call on the selected line.
The currently selected line is indicated by an asterisk (
which the corresponding proxy server has outstanding new mail are
flagged with plus ( + ) characters. The proxy server IP address is
displayed on the info line. Lines that should be registered to a proxy
but have failed registration for any reason are displayed in faded text
and are not selectable from the menu.
Exit the LINE display by pressing a line number key to start a new call
on the selected line and put any other call on hold, or by pressing the
END key to exit without starting a new call. Press the
page through additional items on the Line menu.
Symbol menu
The symbol menu allows you to change the set of characters available
for data entry through multiple key presses of the dial pad keys.
While dialing a number or entering login information, press the
softkey to view a menu of possible sets of characters that can be
entered using multiple key presses of the dial pad keys. Normally, a
simple numeric mode is selected; selecting other symbol modes
allows convenient access to the complete printable US ASCII
character set. The following table shows what characters are available
through repeated key presses in various symbol modes.
Key Numeric Alpha-Numeric
1 1 1 ; : / \ ! '
2 2 a b c 2 A B C
3 3 d e f 3 D E F
4 4 g h I 4 G H I
5 5 j k l 5 J K L
* ). Lines for
More
Numeric-Alpha Punctuation
1 @ : 1
2 A B C a b c ; , 2
3 D E F d e f & | ` ~ 3
4 G H I g h i ( ) 4
5 J K L j k l < > 5
PN: 1725-36038-001-L.doc
softkey to
Symb