Polycom SpectraLink 8020 Administration Manual page 60

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
60
Enter the password that corresponds to this Username.
WPA2-Enterprise
The Authentication
the authentication method for RADIUS server. See the System
Components section for tested models.
Fast Handoff allows the use of either *
mechanisms allow a phone to quickly and securely roam between
APs with a minimum disruption of audio.
: Enter a username that matches an entry on your
Username
RADIUS server. Alphanumeric strings can be entered using the
alphanumeric string entry technique.
Password : Enter the password that corresponds to this username.
The
Delete [PAC/Cert.]
the phone. When the authentication method is EAP-FAST the
PAC on the phone is deleted. If the RADIUS server has enabled
"anonymous in-band PAC provisioning", then the phone will
automatically re-acquire these credentials from the RADIUS
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning, the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in WPA2 Enterprise PEAP Certificate
Enrollment and EAP-FAST Manual PAC Provisioning section later in
this chapter.
Custom – QoS
SVP mode uses the SVP Server to provide enterprise-grade QoS.
DSCP tags are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten: WT in call = 46
Wi-Fi Standard QoS mode uses standards-based traffic controls for
QoS, instead of the SVP Server.
DSCP tags are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten: Voice = 46
Admission Cntrl is used to enable and disable the use of WMM
Admission Control by the handset for the AC_VO and AC_VI
access categories. If the WLAN is using WMM Admission
Control, the handset should be set to
setting can select either
CCKM
: option removes expired credentials from
, WT standby = 26
, Control = 26, Other = 0
*Mandatory
*EAP-FAST or PEAP as
or OKC . These
, Other = 0 .
.
. If the WLAN is
PN: 1725-36038-001-L.doc