Polycom SpectraLink 8020 Administration Manual page 30

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
30
Authentication information will be accepted from both files. For ease
of administration, it is recommended both file types be utilized.
Guidelines
The files are in plain text, US-ASCII. The general form of the
•
configuration file data is "parameter = value."
• The generic filename must be SIP_allusers.cfg.
• Each specific filename must have the form of SIP_username.cfg
where [username] is as assigned to each individual user by the
system administrator. See Chapter 5 Configure Each SpectraLink
8020/8030 Wireless Telephone, section The Admin Menu, subsection
SIP Registration.
• Username parameters are: alphanumeric, no spaces, no
punctuation, case is ignored, 1-16 characters.
• Generic file information should contain proxy server information
and other SIP system data.
• Specific file information should contain data specific to each user
such as authentication credentials and line appearance data.
• Some parameter lines accept more than one value, separated by a
colon or semicolon character as defined below.
• Any line that begins with a pound sign (#) is ignored.
• In general, space characters are ignored. Space characters may be
included in string values by replacing the space with "%20" or by
enclosing the string in quotes (").
• If necessary, other special characters may be included by using a
hexadecimal representation: (%hh) where hh is the representation
of the character.
• Lines may appear in any order although maintenance may be
simplified by preserving the order in the supplied example file.
Program each of the files according to the following instructions.
PN: 1725-36038-001-L.doc