Polycom SpectraLink 8020 Administration Manual page 54

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
54
as a toggle between Enabled
the current state. Press
state. To modify the password requirement, the default or previously
set password must be entered to verify the change.
will appear only if the password is enabled. The password is disabled
by default. The password must be set in each handset for which
controlled access is desired.
SIP Registration
Individual handsets may be configured to correspond with the SIP
configuration information in the TFTP server. The handset is then
automatically identified at startup. If username and password
information is not configured in the
information will be requested at startup.
In either case, the username must agree with a corresponding
configuration file. See Chapter 5 Programming the SIP Handset Features,
section SIP TFTP Server Configuration Files.
allows you to specify a username and password for
Login
automatically acquiring SIP configuration information. If no
username is specified, the SIP handset will request username and
password at startup and any additional registrations specified here
are ignored.
The username should correspond to the primary (line 1) dial number
assigned to the user. The username and password should also
correspond to the authentication credentials as created by your
system administrator for your primary line registration. Usernames or
passwords can be erased by selecting the item, then pressing the
softkey and then the Save
, , and
Reg 2 Reg 3 Reg 4
usernames and passwords that may be required by your handset for
any additional line appearances (registrations) that may appear in the
specific user's configuration file. This information will be ignored if a
Login username is not provided.
OAI Enable/Disable
Polycom's Open Application Interface (OAI) enables third-party
computer applications to display alphanumeric messages on the
handset display and take input from the handset keypad. Refer to the
OAI Specification (Version 2.0) documentation for information about
administering the OAI Gateway and the services it can provide.
and Disabled . The info line will display
NavOK to change the password protection
Admin menu, then this
softkey.
allow you to specify additional authentication
Change Password
Bksp
PN: 1725-36038-001-L.doc