Phone Config - Polycom SpectraLink 8020 Administrator's Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Attention: Modifications of settings under WLAN Settings = "CCX" may get reflected in the
corresponding settings under WLAN Settings = "Custom" or vice versa. If the configuration is changed
from "CCX" to "Custom" or vice versa, it is recommended to double-check all settings.

Phone Config

32
Telephony Protocol
Telephony Protocol lets you select the VoIP protocol that your site is
licensed to download and run. The SIP protocol used for the
SpectraLink 8020/8030 Wireless Telephones requires license option
selection . Any other protocol will cause the handset to
36
malfunction.
PTT/Emerg. Button
This option appears only on the SpectraLink 8030. The Push-to-talk
button on the left side of the handset may be configured to either
standard PTT functionality or to dial the specified emergency call
number when pressed twice within two seconds. These are mutually
exclusive options. Both are disabled by default.
When using the Handset Administration Tool to configure this
option, ensure the PTT option in the
is disabled before enabling the
tab. When is enabled, the
Config PTT
grayed out.
Push-to-talk [Disable/Enable]
the menu for the end user to subscribe to allowed channels, etc.
Config
If disabled, the PTT options will not appear on the
the Emergency Dial option may be enabled.
PTT is disabled by default. When enabled, all 24 PTT channels are
allowed by default. To toggle the allowed status of any channel, select
, scroll to the channel to be disallowed and press
Allowed Channels
. Allowed channels are displayed with an asterisk (*) in the left
NavOK
column. Only those channels allowed in the
on the Config menu where they can be subscribed to by the end user.
The priority channel, labeled by default as channel 25, may be set and
will be available to all PTT handsets. When a PTT broadcast is made
on the priority channel, it will override any active PTT transmission
on all other channels.
PTT Admin tab
option in the
Emergency Dial
Emergency Dial
– If enabled, the PTT options will appear on
Admin
PN: 1725-36038-001-H.doc
under
Handset type
Phone
option will be
menu and
Config
menu will appear