Download And Install Handset Software; Minimum Configuration Process - Polycom SpectraLink 8020 Administration Manual

Download and Install Handset
Software

Minimum Configuration Process

PN: 1725-36038-001-L.doc
SpectraLink 8020/8030 Wireless Telephones support a number of
different IP protocol integrations. All SpectraLink 8020/8030 Wireless
Telephones are shipped from Polycom with a generic software load
that allows them to associate to a wireless LAN and download
functional software from a TFTP server. The handsets will not
function properly without downloading appropriate software.
The following details the process to properly configure SpectraLink
8020/8030 Wireless Telephones and download software via over-the-
air file transfer.
You may need to charge the handset first. See Chapter 8 Using the
8020/8030 Handset.
1. Download the latest SpectraLink 8020/8030 Wireless
Telephone IP software from
http://www.polycom.com/usa/en/support/voice/wi-
fi/spectralink_8030_wireless.html.
2. Load the latest version of the SIP code and place it on the TFTP
server and ensure the TFTP server is started. The slnk_cfg.cfg is
downloaded first by the phone, and defines the SIP code files
that will be subsequently downloaded. Be sure to use the
slnk_cfg.cfg file that comes with the latest version of the SIP
code and do not change the order of the files within
slnk_cfg.cfg.
The following six files are included in the typical SIP software
package.
4
41