Polycom SpectraLink 8020 Administration Manual page 59

Spectralink 8020/8030 wireless telephone session initiation protocol (sip)
Hide thumbs Also See for SpectraLink 8020:
Table of Contents

Advertisement

PN: 1725-36038-001-L.doc
Authentication
Select either
Open System
WEP Enable/Disable
Select either
Enable WEP
Key Information
Default Key
Enter the key number specified for use by the
handsets. This will be
Key Length
Select either
length specified for use at this location.
Key 1-4
Scroll to the key option that corresponds to the
Default Key
that was entered above. Enter the encryption key
as a sequence of hexadecimal characters. (Use the
to access hexadecimal digits A through F.
Rotation Secret
This is used for proprietary WEP key rotation. Refer to your
custom document if this feature is supported in your system.
WPA2-PSK
The security features of WPA2 (Wi-Fi Protected Access)
using PSK are available and may be used if supported by the APs in
the facility. Select either
eight and 63 characters in length or
bit key code.
WPA-PSK
The security features of WPA (Wi-Fi Protected Access)
using PSK (pre-shared key) are available and may be used if
supported by the APs in the facility. Select either
enter a passphrase between eight and 63 characters in length or
Shared Key
and enter the 256-bit key code.
Cisco FSR
(Fast Secure Roaming) FSR is designed to minimize call
interruptions for SpectraLink 8020/8030 Wireless Telephone users as
they roam throughout a facility. Cisco FSR requires specific
configuration of the Cisco APs in your site. See your Cisco
representative for detailed documentation on configuring the APs
and other required security services on the wired network. To
configure Cisco FSR on a handset, you must enter a Radius Server
username and password into each handset.
Username
Enter a username that matches an entry on the RADIUS server.
Usernames are alphanumeric strings, and can be entered using the
alphanumeric string entry technique.
Password
Configure Each SpectraLink Wireless Telephone
or
Shared Key
.
or
Disable WEP
.
1
through
4
.
40-bit
or
128-bit
Passphrase
and enter a passphrase between
Pre-Shared Key
depending on the key
2
and
3
keys
and enter the 256-
Passphrase
and
Pre-
59

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SpectraLink 8020 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Spectralink 8030

Table of Contents