Polycom SpectraLink 8020 Administration Manual page 120

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Message Description
System Locked SpectraLink 8000 SVP Server is
(with Busy Tone) locked.
TFTP A failure has occurred during a TFTP
ERROR(x):yy software download. (x) = The file
number which was being downloaded;
yy is an error code describing the
particular failure. Possible error codes
are:
01 = TFTP server did not find the
requested file.
02 = Access violation (reported from
TFTP server).
07 = TFTP server reported "No such
user" error.
16 = No TFTP server address.
81 = File put into memory did not CRC.
FF = Timeout error. TFTP server did
not respond within a specified period of
time.
Too Many Errors The handset continues to reset and
cannot be recovered.
Unknown A phrase is missing from the phintl file.
xx:yy:zz
The handset is internally updating its
Updating ...
software images.
Updating Code... Handset is downloading new software
into memory. The number icons at the
bottom of the display indicate which file
number is currently being downloaded.
This message also displays a progress
bar. When the progress bar fills the
display line the update operation is
complete on that file.
Wait for bandwidth The phone is waiting for bandwidth
sufficient for voice communication.
Waiting... Handset has attempted some
operation several times and failed.
Wrong Code Type The software loaded into the handset
is incorrect for this model phone.
120
Action
Try call again later, system has been
locked for maintenance.
Error code 01, 02, 07, or 16 - check the
TFTP server configuration.
Error code 81, the handset will attempt
to download the file again.
For other messages, power off the
handset, then turn it on again to retry
the download. If the error repeats, note
it and contact Polycom Customer
Support.
Fatal error. Return handset to Polycom.
Download new software from the
Polycom website per Software
Maintenance.
None. The handset may do this briefly
after a download. This is informational
only.
None. When the progress bar fills the
display line the update operation is
complete on that file.
Do not turn the handset off during this
operation.
No action required. You will have the
option of pressing END to abort the
phone call.
None. The handset is waiting for a
specified period of time before
attempting that operation again.
Replace the software image on the
TFTP server with software that is
correct for the handset model.
PN: 1725-36038-001-L.doc