Polycom SpectraLink 8020 Administration Manual page 125

Parameter
PROXYn_
KEYPRESS_INFO
PROXYn_HOLD_IP0 enable
PROXYn_PRACK
PROXYn _
MAIL_SUBSCR
PROXYn_
MAIL_ACCESS
PROXYn_
REREG_SECS
Not used in
8020/8030
For mail notifications, in general you will need to define only one contact parameter for each proxy. If the proxy
4
server automatically creates and renews subscriptions when the handset registers, then only the
PROXYn _MAIL_NOTIFY contact need be specified. If the handset must subscribe to a particular contact to get mail
notification, then only the PROXYn_MAIL_SUBSCR contact needs to be specified.
PN: 1725-36038-001-L.doc
Value
enable
disable
disable
enable
disable
name@xxx.xxx.xxx.xxx
or
sip:name@domain
name@xxx.xxx.xxx.xxx
or
sip:name@domain
35 seconds to
3600 seconds
*default 3600 seconds
Description
Controls generation of SIP
INFO requests to the SIP
server for keypress
events. Normally enabled.
Controls setting of the
media stream IP
destination address to 0
(zero) when a call is put
on hold. See config file
example for more
information.
Enables reliable
provisional responses to
INVITE requests
Contact to whom the
handset should subscribe
for mail notification. See
config file example for
more information.
Contact to whom the
handset should invite to
access the mail center.
This is the main voicemail
dial number.
The requested expiration
interval in REGISTER
request messages.
Proxy Server Command Table
Notes
n = 1, 2, 3
n = 1, 2, 3
Use for compatibility with
older SIP servers that may
not recognize newer
stream attribute
parameters for HOLD
status.
n = 1, 2, 3
n = 1, 2, 3
name = mail server contact
name.
xxx.xxx.xxx.xxx = IP4
address.
Domain where the mail
4
resides .
n = 1, 2, 3
name = mail server contact
name.
xxx.xxx.xxx.xxx = IP
address
Domain where the mail
resides.
n = 1, 2, 3
If the server has a lower
maximum setting or a
higher minimum setting
than that requested, the
server response takes
precedence.
See example file
125