Default Settings - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Setting/profile
Language
Ring Cadence
Ring Tone
Ring Volume
Vibrate Cadence
Ring Delay
Noise Mode
Headset/Speaker
Key Tones
Warning Tones
Push-to-talk
PTT Vibrate
Emergency Dial
Push-to-talk must be enabled by the system administrator before it can be activated by the user. If it is not
enabled, then it will not appear on the Config menu and will not be "On" for any profile.
PTT Vibrate is available only when Push-to-talk has been enabled by the system administrator.
Emergency Dial must be enabled by the system administrator. If enabled, it will be "On" (or available for
use) in every profile.
92

Default settings

The profile options on the standby menu may be reset to their default
values by the Restore Defaults
the default settings:
Silent Vibrate
English English
Off Off
Tone 1 Tone 1
1 1
Off PBX
0 0
Normal Normal
Speaker Speaker
Off Off
Off Off
Off Off
Disabled Disabled
On On
option in the Admin menu. These are
Soft Loud
English English
PBX PBX
Tone 1 Tone 1
3 7
Off Off
0 0
Normal Normal
Speaker Speaker
On On
Off Off
On On
Disabled Disabled
On On
PN: 1725-36038-001-L.doc
Custom
English
PBX
Tone 1
5
PBX
5
Normal
Speaker
On
Off
On
Disabled
On