Phone Config - Polycom SpectraLink 8020 Administration Manual

Phone Config

1725-36030-001_B.doc
Telephony Protocol
Telephony Protocol lets you select the VoIP protocol that your site is
licensed to download and run. The SpectraLink Radio Protocol (SRP)
used for the SpectraLink 8020/8030 Wireless Telephones in a
SpectraLink 8000 Telephony Gateway system requires Telephony
Protocol type . Any other protocol will cause the handset to
030
malfunction.
Push-to-talk
PTT is disabled by default. When enabled, all 24 PTT channels are
allowed by default. To toggle the allowed status of any channel, select
, scroll to the channel to be disallowed and press
Enable Channels
. Enabled channels are displayed with an asterisk (*) in the left
NavOK
column. Only those channels enabled in the Admin menu will appear
on the where they can be subscribed to by the end user.
Config menu
The priority channel, labeled by default as channel 25, may be set and
will be available to all PTT handsets. When a PTT broadcast is made
on the priority channel, it will override any active PTT transmission
on all other channels.
Time Zone
Worldwide time zone options are available. Greenwich Mean Time
(GMT) is the default.
Daylight Savings
The handset may be adjusted for daylight savings time.
Protected Speed-dial
The protected speed-dial number is designed to be programmed to a
number that should be called in emergency situations. It appears as
the first item on the speed-dial list and is specially marked with a
greater-than symbol (>) as the first character in its name. Only one
such number can be programmed Enter the number to be dialed, the
name (e.g. ), and scroll to assign to one key press. The choices
Security
SpectraLink 8020/8030 Wireless Telephone Configuration
25