Minimum System Requirements - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Minimum System Requirements

14
• A wireless LAN must be properly configured and operational
through the use of 802.11a/b/g/n wireless APs. Consult the
VIEW Configuration Guide for the appropriate make/model of
WLAN.
• A TFTP must be available on the network in order to load the
appropriate software into the handsets. The current handset
software must be installed in the proper TFTP download
directory.
• If SVP is used for QoS, the SVP Server must be installed and
properly configured.
• Software versions required, if SVP and/or OAI are used:
Component
SpectraLink 8000 SVP Server
OAI Server MOG 600
OAI Server MOG 700
• If Wi-Fi Standard QoS is used, then each AP must be configured
for such features as WMM-Power Save; WMM-Admission
Control; proper EDCA parameters; DSCP mapping for voice and
control traffic; call admission control and Proxy ARP. Consult the
appropriate VIEW Configuration Guide for these settings.
• If WPA2-Enterprise is used, then all portions of the Public Key
Infrastructure (PKI) need to be installed and configured properly
in order acquire the network.
• An approved SIP call server must be installed and operational on
the LAN. A complete list of approved product can be found on
the Polycom website at
http://www.polycom.com/support/voice/wi-
fi/feature_lists/spectralink_8020_8030_sip_featurematrix.html
Version
17x.034 or higher
54.032 or higher
82.019 or higher
PN: 1725-36038-001-L.doc