Polycom SpectraLink 8020 Administration Manual page 124

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Parameter
PROXYn_TYPE
PROXYn_
KEEPALIVE_SECS
PROXYn_
KEYPRESS_2833
3 For up-to-date Asterisk voicemail commands, go to:
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+VoiceMailMain
124
Value
3
Asterisk
NEC (NECSIP)
Mitel
Cisco Call Manager
Express or Unified
Communications
Manager Express.
(CCME)
PingTel
Interactive Intelligence
(ININ)
Toshiba
Cisco Call Manager or
Unified Communcations
Manager (CCM)
3Com
Shoretel
DeltaPath
0 or 10 to 3600
seconds
*default = 0
*enable
disable
*default (in example
file)
Description
Specify the manufacturer
of each defined proxy
server. See sample files
for vendor notation.
Specifies that the handset
should send keepalives to
the PROXYn server.
Controls generation of in-
stream RFC2833
formatted key press
events. Match what is
required by your PBX. See
RFC2833. See config file
example for more
information.
Notes
Used by the handset to
perform proxy-specific
actions based on known
behavior for specific proxy
types. Only the three
shown values may be
used. Omit this parameter
if the value is not one of
these recognized settings.
n = 1, 2, 3
The keepalive interval
defaults to ZERO which
disables the feature.
When specified, the
interval can be set to zero
or to 10 to 3600 seconds.
If a keepalive fails to get a
response within the SIP 32
second timeout, then
keepalives are terminated
until the next successful
registration to the proxy.
See example file.
n = 1, 2, 3
PN: 1725-36038-001-L.doc