Appendix C: Sample Sip Configuration Files - Polycom SpectraLink 8020 Administration Manual

Appendix C: Sample SIP
Configuration Files
SIP_allusers.cfg
# SIP ALL USERS Configuration file example
# Configuration file format example
# Maximum number of characters allowed per line (excluding comments) in this configuration file
is 121.
#-----------------------------------------------------------------------------------------#
#-----------------------------------------------------------------------------------------#
# Codec preference order only.
# can be G.711-ulaw, g.711u, G.711U, g711u, G.711U, g729, G729, G.729, g729ab, g729AB
# if g711u is omitted it will be added to end of list.
# if g711a is omitted it will be added to end of list after u.
CODECS = g711u, g711a
#-----------------------------------------------------------------------------------------#
# CALL_LOGGING enables to log the Incoming/Answered and Missed calls happened on the phone.
# Disabling call logs will not log any of the calls on the phone.
CALL_LOGGING = enable
#-----------------------------------------------------------------------------------------#
#-----------------------------------------------------------------------------------------#
#
# PROXY settings... At least one is required and up to three may be specified.
# Where one is specicifed, all proxy settings must share the
# same numbered prefix (i.e. PROXY1_...)
#
# One PROXYn_TYPE (PBX/Call Server) entry is required, additional ones are optional as you
# can register secondary line appearances with other PROXY servers
# Uncomment Your Proxy Type from the list below
#
#PROXY1_TYPE =Asterisk
#PROXY1_TYPE =NECSIP
#PROXY1_TYPE =MITEL
#PROXY1_TYPE =CCME
#PROXY1_TYPE =PINGTEL
#PROXY1_TYPE =ININ
PN: 1725-36038-001-L.doc
Sample SIP configuration files are illustrated below. These files are
available as a download from the software updates site and may be
customized for your application. Please note that these are merely
samples and will not work on your system as written here or as
downloaded. Your configuration files must be locally programmed
according to your site requirements.
This does not enable/disable codecs. (Optional)
14
129