Status Menu: General - Cisco D9824 Installation And Configuration Manual

Status Menu: General

Menu Item
Input
Status
Rate (Mbps)
Level (dBm)
PE
Mode
Auth
Enc
Scr
CA System
Video
Rate (Mbps)
Alarms
Warnings
Description
Indicates the currently selected input
source.
Indicates whether the input signal is
locked.
Indicates the bit rate of the input transport
stream, in Mbps.
Indicates the strength of the received
signal level, in dBm.
Select the Program Entry to view.
Indicates how the program is scrambled.
Indicates whether the receiver is
authorized to receive the program.
Indicates whether the received program is
encrypted.
Indicates whether the received program is
scrambled.
Indicates the type of Conditional Access
(CA) system used by the program.
Indicates the video encoding, format, and
resolution of the received program.
Indicates the bit rate of the received video
stream, in Mbps.
Displays the number of active alarms.
Indicates the number of active warnings.
Parameters
RF1 to RF4, ASI, or IP.
Locked - Indicates the receiver is
locked to a carrier with no valid
content.
Lock+Sig - Indicates the receiver
is locked to a carrier with valid
content.
No Lock - Indicates the receiver
is not locked to a carrier.
–
–
PE1 to PE32.
Unkn, DES, DVB, BISS1, BISS2,
or BISS3.
Yes or No.
Yes or No.
Yes or No.
SA, BISS, or FTA (Free To Air).
MPEG1, MPEG2, or H264 format
with a resolution of:
SD480i/2997, SD480i/3000,
SD576i/2500, HD720p/5000,
HD720p/5994, HD720p/6000,
HD1080i/2500, HD1080i/2997,
or HD1080i/3000.
Unknown or Unsupported.
–
–
–
Status Menu
47