Moip Output Stream Configuration - Cisco D9800 Reference Manual

API Definitions
If successful, the return body will look like:
"output": {
}

MOIP Output Stream Configuration

Table 165: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
GET Syntax
"asi": {
"pe": {
"peid": "PE1",
"outchan": "105",
"pmtpid": "8191"}
}
Description
Single-stream (Basic, NTC MOIP), moip output port pair 1/2
https://192.168.0.1/ws/v2/service_cfg/output/moip/ipo, or
https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo
Single-stream (Basic): MOIP is not supported
Multi-stream unit, moip output port pair 1/2:
https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo
Multi-stream unit, moip output port pair 3/4:
https://192.168.0.1/ws/v2/service_cfg/output/moip2/ipo
Allows set or get of MOIP Stream ID output parameters.
GET, POST
Read, Write
User, Admin
Singlestream NTC MOIP unit:
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip/ipo"
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo"
Multistream unit:
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo"
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip2/ipo"
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Output Configuration Command
197