Motorola RFS Series Reference Manual page 100

4-12 Motorola RF Switch System Reference Guide
2. Select the Ports by VLAN
VLAN details display within the VLANs by Port tab.
3. Highlight an existing VLAN and click the
message. Be advised, changing VLAN designations could disrupt access to the switch.
4. Click OK to continue. A new window displays wherein the VLAN assignments can be modified for the
selected VLAN.
SWITCH NOTE: The ports available vary by switch.
On the WS5100, the available ports are eth1 and eth2.
On the RFS6000, the available ports are ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8 and up1.
On the RFS7000, the available ports are ge1, ge2, ge3 and ge4.
tab.
Edit button. The system displays a Port VLAN Change Warning