Motorola RFS Series Reference Manual page 345
Wireless lan switches wing system
Hide thumbs
Also See for RFS Series:
- Reference manual (948 pages) ,
- System reference manual (590 pages) ,
- Reference manual (1054 pages)
Table of Contents
Advertisement
2. Click the
Statistics
tab.
3. Refer to the following information as displayed within the
Interface
Displays the Ethernet 1, Ethernet 2 or VLAN 1 interface used to add the ACL
association to the switch.
Action
Displays the permit, deny or mark designation for the ACL. If the action is to mark,
the packet is tagged for priority.
Protocol
Displays the permit, deny or mark designation for the ACL. If the action is to mark,
the packet is tagged for priority or "type of service."
Low Source IP
Displays the Low Source IP Address from where the packets are sourced.
High Source IP
Displays the High Source (highest address in available range) IP Address from
where the packets are sourced.
Low Destination IP
Displays the Low Destination (lowest address in available range) IP Address.
High Destination IP
Displays the High Destination IP Address.
Packets In
Displays the number of packets (in bytes) transmitted over the ACL.
Packets Out
Displays the number of instances this ACL has been used. Periodically review to
determine whether specific ACLs should be deleted or modified to make relevant.
Statistics
tab:
6-31
Switch Security
Advertisement
Table of Contents
