Configuring Radio Groups For Mu Load Balancing - Motorola RFS Series Reference Manual

4-106 Motorola RF Switch System Reference Guide

4.7.6 Configuring Radio Groups for MU Load Balancing

In order to do MU load balancing, radios must be grouped. Usually, two radios with similar characteristics
and geographically close to each other can be grouped together.
By default, a radio is not in any group and theload balancing algorithm would not apply to it.
To configure a group of radios together:
1. Select Network
2. Go to the Configuration
3. Select a radio you wish to add to a group and click the
4. Enter the Group ID
5. Click OK to save the changes.
6. Repeat steps 3 through 5 for each radio you wish to add to groups.
7. When you have finished adding radios to groups, click the
save your changes.
8. To verify the radio groups click on the
on viewing radio groups refer to
4.7.6.1 Viewing Access Point Radio Groups
Refer to the Groups
To view existing radio group settings:
1. Select Network
> Access Port Radios from the main menu tree.
tab.
for the group you wish to add the selected radio to.
Groups
Viewing Access Point Radio Groups on page
tab to view the Group IDand
> Access Port Radios from the main menu tree.
Edit button.
Apply button on the
tab to view configured radio groups. For more information
Index associated with each radio when added to a WLAN.
Configuration tab to
4-106.