Configuring Switch Discovery - Motorola RFS Series Reference Manual

5-58 Motorola RF Switch System Reference
3. Select an existing neighbor and click the
The radio index and description display in the upper right corner of the screen. The
value represents the radios that can be added as a neighbor for the target radio.
existing radios (neighbors).
4. Select one of the following four actions from the Self Healing Action drop-down menu:
• None - The radio takes no action at all when its neighbor radio fails.
• Open Rates - The radio will default to factory-default rates when its neighbor radio fails.
• Raise Power - The radio raises its transmit power to the maximum provided its power is lower than
the maximum permissible value.
• Both - The radio will open its rates as well as raise its power.
5. Click the Add ->
dedicates neighbors for this radio.
6. Select a radio and click
Radios list.
7. Refer to the
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
8. Click OK to save the changes to the running configuration and close the dialog.
9. Click Cancel

5.7 Configuring Switch Discovery

Switch discovery enables the SNMP discovery (location) of devices. To discover devices in the specified
range of IP addresses, the switch Web UI sends SNMP GET requests (using the user specified SNMP v2 or
v 3 version) to all IP addresses on the specified network. The results of the discovery are helpful for isolating
devices compatible for operation with the locating switch, thus extending the potential coverage area and
MU support base within the switch managed network.
Use the Discovery Profiles
addresses. Existing profiles can be modified or deleted and new profiles can be added as needed. Refer to
button to move a radio from the Available Radios list to the Neighbor Radios list. This
<- Remove to move the radio from the Neighbor Radios list to the Available
Status field for an update of the edit process.
to close the dialog without committing updates to the running configuration.
tab to view existing SNMP search profiles using a user defined range of IP
Edit button.
Available Radios
Neighbor Radios are