Defining The Ipsec Vpn Remote Configuration - Motorola RFS Series Reference Manual

6.8.2 Defining the IPSec VPN Remote Configuration

Use the IPSec VPN Remote
remote end of the IPSec VPN tunnel. The Remote tab is also used for defining the IP address range used
within the IPSec VPN tunnel and configuring the authentication scheme for user permissions within the IPSec
VPN tunnel.
To define the IPSEc VPN's remote configuration:
1. Select Security
2. Click the Remote
3. Refer to the Configuration
DNS Server
WINS Server
Apply
Revert
4. Click the IP Range
Index
tab to configure the DNS and/or WINS Servers used to route packets to the
> IPSec VPN from the main menu tree.
tab.
field to define the following:
Enter the numerical IP address of the DNS Server used to route information to the
remote destination of the IPSec VPN.
Enter the numerical IP address of the WINS Server used to route information to
the remote destination of the IPSec VPN.
Click Apply to save any updates made to the screen.
Click the Revert button to disregard changes and revert back to the last saved
configuration.
tab to view the following:.
Enter the index assigned to the range of IP addresses displayed in the Starting and
Ending IP Address ranges. This index is used to differentiate the index from others
with similar IP addresses.
6-55
Switch Security