Motorola RFS Series Reference Manual page 113

MU Rate Limiting
Down
MU Load Balance
Mode
4.5.1.1 Editing the WLAN Configuration
Security measures for the switch and its WLANs are critical. Use the available switch security options to
protect each WLAN from wireless vulnerabilities, and secure the transmission of RF packets between
WLANs and the MU traffic they support.
The user has the capability of configuring separate security policies for each WLAN. Each security policy can
be configured based on the authentication (Kerberos, 802.1x EAP, Hotspot) and /or encryption (WEP,
KeyGuard, WPA/WPA2-TKIP or WPA2/CCMP) scheme.
All of the default WLANs are available for modification when the user accesses the Wireless LANs screen.
However, the WLAN requires an authentication or encryption scheme be applied before it can begin securing
the data traffic within the switch-managed wireless network. The Edit screen provides a mean of modifying
the existing WLANs SSID, description, VLAN ID assignment, inter-WLAN communication definition and
encryption and authentication scheme. To edit WLAN configuration settings:
1. Select Network
2. Click the Configuration
3. Select a WLAN to modify from the table.
Enter an downstream rate limit in kbps for all MUs associated with the switch
across all WLANs.
Configure a method for distributing traffic across MUs using the MU Load
Balancing Mode. Select Count to set load balancing based on number of MUs.
Select By Throughput to set load balancing based on total throughput of MUs.
> Wireless LANs from the main menu tree.
tab.
4-25
Network Setup