Viewing And Configuring Port Instance Details - Motorola RFS Series Reference Manual

Port FastBPDU Guard Enable this option to change the status of the Port Fast BPDU Guard.
Port Version
Port Path Cost
Admin Point-to-Point
status
Port Enable
Port Migration
Admin Edge Port
2. Click on OK button to save and commit the new configuration.
3. Click Cancel

4.10.4 Viewing and Configuring Port Instance Details

Use the Port Instance
Priority and Admin Internal Path Cost.
To view and configure the MSTP bridge instance:
1. Select Network
Select a value to reconfigure the port version.
Port Path Cost Displays the path cost for the specified port index. The default path
cost depends on the speed of the interface.
Speed Default path cost
<=100000 bits/sec
<=1000000 bits/sec
<=10000000 bits/sec
<=100000000 bits/sec
<=1000000000 bits/sec
<=10000000000 bits/sec
<=100000000000 bits/sec
<=1000000000000 bits/sec
>1000000000000 bits/sec
Define the point-to-point status as ForceTrue or ForceFalse. ForceTrue indicates this
port should be treated as connected to a point-to-point link. ForceFalse indicates
this port should be treated as having a shared connection. A port connected to a
hub is on a shared link, while one connected to a switch or workstation is a point-
to-point link.
Select this checkbox to use this port for the forwarding of packets on the switch.
The switch can interoperate with legacy 802.1d bridges running STP / RSTP. If the
port receives a legacy 802.1D configuration BPDU, it only sends 802.1D BPDUs over
its port from that point on. Enable this option to restart detection of whether the
port is connected to an MSTP capable bridge or a legacy 802.1 bridge.
Select the checkbox to define this port as an admin edge port.
to disregard the changes and revert back to the previous configuration.
tab to view and configure MST parameters per port per instance, including Port
> Multiple Spanning Tree
200000000
20000000
2000000
200000
20000
2000
200
20
2
from the main menu tree.
4-149
Network Setup