Viewing Discovered Switches - Motorola RFS Series Reference Manual

5.7.1.1 Adding a New Discovery Profile
If the contents of an existing profile are no longer relevant to warrant modification using the Edit function,
then a new switch discovery profile should be created
To create a new switch discovery profile:
1. Select Services
2. Click the Add
3. Define the following parameters for the new switch discovery profile:
Profile Name
Start IP Address
End IP Address
SNMP Version
4. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
5. Click OK to save the changes to the running configuration and close the dialog.
6. Click Cancel

5.7.2 Viewing Discovered Switches

Refer to the Recently Found Devices
discovered device compatible with the locating switch (running switch software version 1.1 or higher) is
> Discovery from the main menu tree.
button at the bottom of the screen.
Define a user-assigned name used to title the profile. The profile name should
associate the profile with the group of devices or area where the discovered
devices should be located.
Enter the starting numeric (non DNS) IP address from where the search for
available network devices is conducted.
Enter the ending numeric (non DNS) IP address from where the search for
available network devices is conducted
Use the drop-down menu to define the SNMP version (either v2 or v3) used for
discovering available network devices.
field for an update of the edit process.
to close the dialog without committing updates to the running configuration.
tab to view a table of devices found by the discovery process. Each
5-61
Switch Services