Viewing Files - Motorola RFS Series Reference Manual

1. Refer to the Source
select Server.
2. Provide the name of the File.
3. Use the Using
HTTP.
FTP transfers require a valid user ID and password.
4. Enter an IP Address
jeopardizing the success of the file transfer.
5. Enter the User ID
6. Enter the Password
7. Specify the appropriate
depending on the target selected.
8. Use the To drop-down menu (within the Target field) and select Wireless Switch.
9. Use the Browse
10.Click the Transfer
file transfer message.
11.Click Abort button any time during the transfer process to abort the file transfer.

3.5.2 Viewing Files

Use the File System
types:
SWITCH NOTE: The File System tab is only available on the RFS6000 and RFS7000
switches. The WS5100 does not have USB or Compact Flash ports and as such does not
support this feature.
• flash
field to specify the details of the source file. Use the
drop-down menu to configure whether the file transfer is conducted using FTP, TFTP or
of the server receiving the configuration file. Ensure the IP address is valid or risk
credentials required to transfer the configuration file from a FTP server.
required to send the configuration file from an FTP server.
Path name to the target directory on the server. The Target options are different
button to browse and select the location to store the file marked for transfer.
button to complete the file transfer. The
tab to review the files available to the switch. The switch maintains the following file
Switch Information
From drop-down menu and
Message section displays the status of the
3-35