Motorola RFS Series Reference Manual page 149

3. Select any of the above listed parameters by clicking on the checkbox associated with it.
4. Click the Close
4.5.2.3 Viewing WLAN Switch Statistics
The Switch Statistics
optimal for displaying a snapshot of overall WLAN traffic on your switch.
To view detailed statistics for a WLAN:
1. Select a Network
2. Click the Statistics
3. Select a WLAN from the table displayed in the Statistics screen and click the
4. Refer to the Packet Rates
at data rates from 1.0 to 54.0 Mbps. If a large number of packets are sent and received at a slower data
rate, then perhaps the switch is not adequately positioned or configured to support the MUs within that
WLAN.
NOTE: The Motorola RF Management Software is recommended to plan the deployment
of the switch. Motorola RFMS can help optimize the positioning and configuration of a
switch in respect to a WLAN's MU throughput requirements. For more information, refer
to the Motorola Web site.
5. Refer to the Retry Counts
6. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
7. Click Refresh
8. Click Close to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.
button to exit the screen.
screen displays the sum of all WLAN statistics. The Switch Statistics screen is
> Wireless LANs from the main menu tree.
tab.
field to review the number of packets both transmitted (Tx) and received (Rx)
field to review the number packets requiring retransmission from the switch.
field for the current state of the requests made from applet. This field displays error
to update the Packet Rate and Retry Count data displayed within the screen.
4-61
Network Setup
Switch Statistics button.