Motorola RFS Series Reference Manual page 263

7. Refer to the Status
any "SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel
5.2.9.2 Adding a New DHCP Pool Class
The Add DHCP Pool Class Configuration
Adding a New DHCP User
to configure a maximum of 4 pool class address range. To add a new DHCP pool class:
1. Select Services > DHCP Server
2. Select the Pool Class
3. Click on the Add
4. Use the Pool Name
DHCP Pool on page
5. Use the Class Name
on page 5-19.
6. The Pool Class Address Range
maximum of 4 address ranges can be assigned to a class.
a. Use the Insert
b. Select a address range and click
7. Refer to the Status
any "SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel
field. It displays the current state of the requests made from the applet. Requests are
to close the dialog without committing updates to the running configuration.
Class, to an existing pool, created using
from the main menu tree.
tab.
button from the Pool Class Names
field to define a new pool name. Enter the pool name created using
5-6.
field to associate an existing class, created using
field is used to assign address range to the class inside the pool. A
button to enter the Start IP and End IP address range for a class.
Remove
field. It displays the current state of the requests made from the applet. Requests are
to close the dialog without committing updates to the running configuration.
dialog is used to associate an existing class, created using
Adding a New DHCP
section.
to delete that particular address range.
Switch Services
Pool. It is also used
Adding a New
Adding a New DHCP User Class
5-23