Configuring Wmm - Motorola RFS Series Reference Manual

4-130 Motorola RF Switch System Reference Guide
7. Click Revert

4.8.4 Configuring WMM

Use the WMM
Voice, Best Effort and Background) the radio has been configured to process. Additionally, the WMM tab
displays the transmit intervals defined for the target access category.
To view existing WMM Settings:
1. Select Network Setup
2. Click the WMM
3. Refer to the WMM table for the following information:
AP Type
Access Category
AIFSN
Transmit Ops
to cancel the changes made and revert back to the last saved configuration.
tab to review each radio type, as well as the Access Category that defines the data (Video,
> Radio Adoption Defaults
tab.
Displays whether the radio is an 802.11a radio or an 802.11bg radio. This value is
read-only and cannot be modified.
Displays the Access Category currently in use. There are four categories: Video,
Voice, Best Effort and Background. Click the Edit button to change the current
Access Category. Ensure the Access Category reflects the radios intended network
traffic.
Displays the current Arbitrary Inter-frame Space Number (AIFSN). Higher-priority
traffic categories should have lower AIFSNs than lower-priority traffic categories.
This causes lower-priority traffic to wait longer before trying to access the
medium.
Displays the maximum duration a device can transmit after obtaining a transmit
opportunity. For higher-priority traffic categories, this value should be set higher.
from the main menu tree.