Motorola RFS Series Reference Manual page 456

8-12 Motorola RF Switch System Reference Guide
Mnemonic
Description
5. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
6. Click the Refresh
7. Click the Close
configured within this screen (it is view-only).
8.2.2.2 Transferring Log Files
If a system log contains data that may require archiving, consider using the
the log file to an external location (that you designate) where there is no risk of deleting the contents of the
log.
To transfer a log file to a user specified location:
1. Select Diagnostics
2. Select the File Mgt
3. Select a target log file to transfer and click the
4. Use the From
sent. If only the applet is available as a transfer location, use the default switch option.
5. Select a target file for transfer from the
listed within the
6. Use the To drop-down menu (within the Target field) to define whether the target log file is to be sent to
the system's local disk (Local Disk) or to an external server (Server).
7. Provide the name of the file to be transferred within the
or the transfer will not take place.
8. If Server has been selected as the source, use the
file transfer is conducted using FTP or TFTP.
9. If Server has been selected as the source, enter the
receiving the log file. Ensure the IP address is valid or risk jeopardizing the success of the log file transfer.
Use the Mnemonic as a text version of the severity code information. A
mnemonic is convention for the classification, organization, storage and
recollection of switch information.
Displays a high-level overview of the event, and (when applicable) message type,
error or completion codes for further clarification of the event. Use this
information for troubleshooting or for data collection.
Status field for the current state of the requests made from applet. This field displays error
button to update the contents of the screen to the latest values.
button to exit the screen. Clicking Close does not lose any data, as there are no values
> System Logging
tab.
drop-down menu (within the Source field) to specify the location from which the log file is
File-Mgt screen.
from the main menu tree.
Transfer File button.
File drop-down menu. The drop-down menu contains the log files
File parameter. Ensure the file name is correct
Using drop down-menu to configure whether the log
IP Address of the destination server or system
Transfer Files screen to export