Configuring A Port - Motorola RFS Series Reference Manual

3. Click the Add
4. Enter a value between 1 and 15 as the Instance ID.
5. Click OK to save and commit the changes.
6. The Bridge Instance tab with now display the new instance ID.
7. Click Cancel
4.10.2.2 Associating VLANs to a Bridge Instance
1. Select Network
2. Select the Bridge Instance
3. Select an ID from the table within the Bridge Instance tab and click on the
4. Enter a VLAN ID between 1 to 4094 in the VLAN ID field. This VLAN ID is associated with the Instance
index. You can add multiple VLANs to an instance.
5. Click OK to save and commit the new configuration.
6. Click Cancel

4.10.3 Configuring a Port

Use the Port tab to view and configure MSTP port parameters, including enabling/disabling the spanning
tree algorithm on one or more ports (displaying the designated bridge and port/root information).
To view and configure MSTP port details:
1. Select Network
button.
to disregard the new Bridge Instance ID.
> Multiple Spanning Tree
tab.
to disregard the changes.
> Multiple Spanning Tree
from the main menu tree.
from the main menu tree.
4-145
Network Setup
Add VLANs button.