Viewing Radius Accounting Logs - Motorola RFS Series Reference Manual

Time of Access Start
Time of Access End
Rate Limit Uplink
(0,100-100000)
Rate Limit Downlink
(0,100-100000)
Available WLANs
Configured WLANs
Time of access in
days
NOTE: Rate limiting parameters need to be part of Radius Access Accept packets. If any
radius server doesn't send rate limit parameters in Radius Access Accept packet, these
parameters will not be configured.
9. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.

6.9.7 Viewing Radius Accounting Logs

Accounting logs contain information about the use of remote access services by users. This information is of
great assistance in partitioning local versus remote users and how to best accommodate each. Remote user
information can be archived to a location outside of the switch for periodic network and user permission
administration.
To display the Radius accounting logs:
1. Select Security
Set the time the group is authenticated to interoperate. Each user within the group
is authenticated with the local Radius server. Those group members successfully
authenticated are allowed access to the switch using the restrictions defined for
the group.
Set the time each group's user base will loose access privileges within the switch
managed network. After this time, users within this group will not be
authenticated by the local Radius server. However, if a user is part of a different
group that has not exceeded their access end interval, the user may still
interoperate with the switch (remain authenticated) as part of that group.
Set the rate limit from the wireless client to the network when using Radius
authentication. A rate limit of 0 disables rate limiting for this direction. Any rate
limit obtained through radius server authentication overwrites the initial user rate
limit for the given MU.
Set the rate limit from the network to the wireless client when using Radius
authentication. Any rate limit obtained through radius server authentication
overwrites the initial user rate limit for the given MU.
Use the Available WLANs
this new group from the available list to the configured list. Once on the
configured list (and the changes applied), the members of this group can
interoperate with the switch on these WLANs (once authenticated by the local
Radius server).
The Configured WLANs columns displays the WLANs this new group can operate
within (once users are configured). Use the
move WLANs from the available list to the configured list.
Select the checkboxes corresponding to the days of the week you would like this
new group to have access to the switch managed network. Of course, the user
base within the group still needs to be authenticated by the local Radius server
first.
field for the current state of the requests made from applet. This field displays error
> Radius Server from the main menu.
Add -> and Remove <- functions to move WLANs for
Add -> and
Switch Security
Remove <- functions to
6-83