Motorola RFS Series Reference Manual page 421

based Access Control Model (VACM) for access control. The architecture supports the concurrent use of
different security, access control, and message processing techniques.
Refer to the v3 screen to review the current SNMP v3 configuration. An Existing User Name can be selected
and edited, enabled or disabled. .
NOTE: The SNMP undo feature is not supported in this product.
To review existing SNMP v3 definitions:
SWITCH NOTE: The 3.x version WS5100 switch uses 3 unique (default) SNMPv3 user
names and passwords for MD5 authentication and DES privacy. If upgrading your
configuration from a 1.4.x or 2.x baseline, you will need to change your SNMPv3
usernames and passwords to ensure SNMPv3 interoperation. The unique SNMPv3
usernames and passwords include:
username = snmpoperator/password = operator
username = snmpmanager/password = symboladmin
username = snmptrap/password = symboladmin
1. Select Management Access
2. Select the V3 tab from within the SNMP Access screen.
3. Refer to the fields within the V3 screen for the following information:
User Name Displays a read-only SNMP v3 username of operator or Admin. An operator
typically has an Access Control of read-only and an Admin typically has an Access
Control of read/write.
Access Control Displays a read-only (R) access or read/write (RW) access for the v3 user. Read-only
access allows the user (when active) to retrieve information, while read/write
access grants the user modification privileges.
> SNMP Access from the main menu tree.
7-7
Switch Management