Viewing Mu Details - Motorola RFS Series Reference Manual

IP Address
Ready
Power Save
WLAN
VLAN
Tunnel
Radio Index
Radio Type
3. Click the Details
information, see
4. Highlight a MU from those listed and click the
currently associated devices.
Be aware that disconnected MUs will often become immediately re-connected to the switch. Ensure
disconnected MUs are permanently removed from switch association.
5. Click the Export

4.6.1.1 Viewing MU Details

The MUs Details
To view MU Details:
1. Select a Network
2. Click the Status
Displays the unique IP address for the MU. Use this address as necessary
throughout the applet for filtering and device intrusion recognition and approval.
Displays whether the MU is ready for switch interoperation. Values are Yes and
No.
Displays the current (read-only) Power-Save-Poll (PSP) state of the MU. The Power
Save field has two potential settings. PSP indicates the MU is operating in Power
Save Protocol mode. In PSP, the MU runs enough power to check for beacons and
is otherwise inactive. CAM indicates the MU is continuously aware of all radio
traffic. CAM is recommended for MUs frequently transmitting with the switch's
Access Ports for periods of two hours or greater.
Displays the name of the WLAN the MU's associated AP is connect to.
Displays the specific VLAN the target MU is mapped to.
Displays the tunnel the target MU is mapped to.
The Radio Index is a numerical device recognition identifier for MU radios. The
index is helpful to differentiate device radios when a particular MU has more than
one radio.
The Radio Type defines the radio used by the adopted MU. The switch supports
802.11b MUs and 802.11 a/b and 802.11 a/g dual-radio MUs. The radio also
supports 802.11a only and 802.11g MUs.
button to launch a screen with additional information about the selected MU. For more
Viewing MU Details on page 4-77
button to export the content of the table to a Comma Separated Values file (CSV).
screen displays read-only MU transmit and receive statistics.
> Mobile Units from the main menu tree.
tab.
Disconnect button to remove the MU from the list of
4-77
Network Setup