Motorola RFS Series Reference Manual page 63

2. Click the Details button.
3. The Interface Statistics
port:
Name Displays the port name.
MAC Address Displays physical address information associated with the interface. This address
is read-only (hard-coded at the factory) and cannot be modified.
Input Bytes Displays the number of bytes received on the interface.
Input Unicast Displays the number of unicast packets (packets directed towards the interface)
Packets received on the interface.
Input NonUnicast Displays the number of NonUnicast Packets (Multicast and Broadcast Packets)
Packets received on the interface.
Input Total Packets Displays the total number of packets received on the interface.
Input Packets Displays the number of received packets dropped by the interface by the input
Dropped Queue of the hardware unit /software module associated with the VLAN. Packets
are dropped when the input Queue is full or unable to processing incoming traffic.
Input Packets Error Displays the number of packets with errors received on the interface. Input Packet
Errors are input errors due to; no buffer space/ignored packets due to broadcast
storms, packets larger than maximum packet size, framing errors, input rate
exceeding the receiver's date handling rate or cyclic redundancy check errors. In
all of these cases, an error is reported and logged.
Output Bytes Displays the number of bytes transmitted from the interface.
Output Unicast Displays the number of unicast packets (packets directed towards a single
Packets destination address) transmitted from the interface.
Output NonUnicast Displays the number of unicast packets transmitted from the interface.
Packets
Output Total Packets Displays the total number of packets transmitted from the interface.
screen displays. This screen displays the following statistics for the selected
3-19
Switch Information