Motorola RFS Series Reference Manual page 429

Threshold values for: Set a threshold value for adopted APs. Use the
AP Conditions
APs within the network. For information on specific values, see
Threshold Values on page
Threshold values for: Use the
WLAN an appropriate Threshold Value unique to the switch. For information on specific
values, see
Threshold values for: Use the
Switch an appropriate Threshold Value unique to the switch. For information on specific
values, see
Unit of Threshold Displays the measurement value used to define whether a threshold value has been
Values exceeded. Typical values include Mbps, retries and %. For information on specific
values, see
4. Select a threshold and click the
AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for the MU,
AP or WLAN. Ensure the value set is realistic, in respect to the number of MUs and APs supporting
WLANs within the switch managed network.
5. Use the Maximum Number of Packets to Send a Trap
value used as the minimum number of data packets required for a trap to be generated for a target event.
Ensure the value is realistic, as setting it to low could generate traps unnecessarily. Refer to
Trap Threshold Values on page 7-16
6. Click the Apply button to save changes made to the screen since the last saved configuration.
7. Click the Revert button to revert the screen back to its last saved configuration. Changes made since the
contents of the screen were last applied are discarded.
as input criteria to define an appropriate Threshold Value unique to the
7-16.
Threshold Name and Threshold Conditions
Wireless Trap Threshold Values on page
Threshold Name and Threshold Conditions
Wireless Trap Threshold Values on page
Wireless Trap Threshold Values on page
Edit button to display a screen wherein threshold settings for the MU,
for additional information.
Switch Management
Threshold Name and Threshold
Wireless Trap
as input criteria to define
7-16.
as input criteria to define
7-16.
7-16.
field (at the bottom of the screen) to enter a
7-15
Wireless