5.8.3.1 Adding AP Location Information
1. To add AP Location information for your site:Select
2. Select the
Site
3. Click the
Add
5.8.4 Configuring SOLE Parameters
To configure the switch's internal SOLE locationing engine:
1.
.Services
>
RTLS
2. Select the
SOLE
3. Check the
Locate All Mobile-Units
This will also disable manual entry of MU MAC addresses in the field below.
This takes effect immediately when the box is checked.
4. Enter a value for the
the locationing of MUs is updated. The valid range for this is between 5 to 3600 seconds.
5. Click the
Apply
tab.
button..
from the main menu tree.
tab.
checkbox to locate all MUs known to the switch across all WLANs.
MU Locate Interval
button to save the MU Locate Interval value.
Services
>
RTLS
in seconds. The
MU Locate Interval
Switch Services
from the main menu tree.
determines how often
5-67