Motorola RFS Series Reference Manual page 319

BSS MAC Address
ESSID
8. Select an Allowed AP and click the
the AP. For more information, see
9. Select an Allowed AP and click the
10.Click the Add
Allowed AP list. For more information, see
6.2.1.1 Adding or Editing an Allowed AP
To add a new address range or modify the address range used to designate devices as allowed:
1. Select Security
2. Click the Configuration
3. Select an existing Allowed AP and click the
AP or click the
4. If adding a new Allowed AP, use the
Access Point. The index range is from 1-200. If editing an existing Allowed AP, this is a read only field
and cannot be modified.
Displays the MAC address of the Allowed AP(s). The MAC addresses displayed
are defined by clicking the
allowing all MAC addresses to be allowed. The list of MAC addresses allowed can
be modified by highlighting an existing entry, clicking the
the properties of the MAC address.
Displays the ESSIDs of the Allowed AP(s). The addresses displayed are defined by
clicking the Add button and entering a specific MAC address or by allowing all
MAC addresses to be allowed. The list of MAC addresses allowed can be
modified by highlighting an existing entry, clicking the
properties of the MAC address.
Edit button to launch a screen used to modify the index and SSID of
Adding or Editing an Allowed AP on page
Delete
button to display a screen used to enter device information for a new AP added to the
> Access Point Intrusion Detection
tab.
Add button to define the attributes of a new Allowed AP.
Index
Add button and entering a specific MAC address or by
Edit
button to remove the AP from list of Allowed APs.
Adding or Editing an Allowed AP on page
from the main tree menu.
Edit button to modify the properties of an existing Allowed
parameter to assign a numerical index value to this particular
Switch Security
Edit
button and revising
button and revising the
6-5.
6-5.
6-5