Motorola RFS Series Reference Manual page 168

4-80 Motorola RF Switch System Reference Guide
MAC Address
MAC Name
4. When using clustering and the
which cluster members' MUs are displayed. To view MUs from all cluster members, select
pulldown menu. To view MUs from a specific cluster member, select that member's IP address from the
pulldown menu.
5. To add a MAC address to MU assoication, click the
association, see
6. To remove a
7. If changes have been made to the MU table, click the
config.
4.6.2.1 MAC Naming of Mobile Units
To configure Mobile Unit settings:
1. Select Network
2. Click the Configuration
3. Enter the MAC Address and MAC Name for the MU being added to the list:
MAC Address
MAC Name
4. Click OK to use the changes to the running configuration and close the dialog.
5. Click Cancel
Each MU has a unique Media Access Control (MAC) address through which it is
identified. This address is burned into the ROM of the MU.
The MAC Name is a user created name used to identify individual mobile unit
MAC Addresses with a user friendly name. To edit an existing entry, double click
the MAC Name and type in the new name.
Cluster GUI
MAC Naming of Mobile
MAC Name association select the item from the table and click the
> Mobile Units from the main menu tree.
tab.
Each MU has a unique Media Access Control (MAC) address through which it is
identified. This address is burned into the ROM of the MU.
The MAC Name is a user created name used to identify individual mobile unit
MAC Addresses with a user friendly name.
to close the dialog without committing updates to the running configuration.
feature is enabled a pulldown menu will be availble to select
Add button. For more information on adding an
Units.
Apply button to save the changes to the running
All from the
Delete button.