Motorola RFS Series Reference Manual page 378

6-64 Motorola RF Switch System Reference Guide
IKE Peer
ACL ID
Transform Set
4. If a Crypto Map with a manual security association requires revision, select it from amongst those
displayed and click the
5. Select an existing table entry and click the
the switch.
6. If a new Crypto Map manual security association requires creation, click the
a. Define the
number, the higher the priority.
b. Provide a unique
configurations.
c. Enter the name of the
d. Use the
within the selected ACL.
e. Select either the
association is an AH Transform Authentication scheme or an ESP Encryption Transform scheme. The
AH SPI or ESP SPI fields become enabled depending on the radio button selected.
f. Define the
been selected.
g. Use the
security protocols and algorithms. During the IPSec security association negotiation, peers agree to
Displays the IKE peer used with the Crypto Map to build an IPSec security
association.
Displays the ACL ID the Crypto Map's data flow uses to establish access
permissions.
Displays the transform set representing a combination of security protocols and
algorithms. During the security association negotiation, peers agree to use a
particular transform set for protecting the data flow.
Edit button to revise its Seq #, IKE Peer, ACL ID and security protocol.
Seq #. The sequence number determines priority among Crypto Maps. The lower the
Name for this Crypto Map to differentiate it from others with similar
IKE Peer used to build an IPSec security association.
ACL ID drop-down menu to permit a Crypto Map data flow using the unique permissions
AH or ESP radio button to define whether the Crypto Map's manual security
In AH SPI and Auth Keys
Transform Set drop-down menu to select the transform set representing a combination of
Delete button to remove it from the list of those available to
or In Esp and Cipher Keys
Add button.
depending on which option has