Configuring Discovery Profiles - Motorola RFS Series Reference Manual

the Recently Found Devices
Each discovered device compatible with the locating switch is displayed in a shaded color to distinguish it
from non-compatible devices.
CAUTION: Switch discovery can be a time consuming operation. However, the switch
discovery operation is a standalone process. This allows users to perform other
configuration operations when discovery is running in the background.

5.7.1 Configuring Discovery Profiles

To configure switch discovery:
1. Select Services
The Discovery
2. Refer to the following information within the Discovery Profiles tab to discern whether an existing profile
can be used as is, requires modification (or deletion) or if a new discovery profile is required.
Index
Profile Name
Start IP Address
End IP Address
SNMP Version
tab to view a table of devices discovered by the current discovery process.
> Discovery from the main menu tree.
page launches with the Discovery Profiles
Displays the numerical identifier used to differentiate this profile from others with
similar configurations. The index is supplied to new profiles sequentially.
Displays the user-assigned name for the profile. The profile name should
associate the profile with the group of devices or area where the discovered
devices are anticipated to be located.
Displays the starting numeric (non DNS) IP address from where the search for
available network devices is conducted.
Displays the ending numeric (non DNS) IP address from where the search for
available network devices is conducted.
Displays the version of the SNMP (either SNMP v2 or v3) used for discovering
available network devices.
Switch Services
tab displayed
5-59