Motorola RFS Series Reference Manual page 75

3. Use the From drop-down menu to specify the location from which the file is sent.
4. Enter the name of the file containing the firmware update in the
This is the file that will append the file currently in use.
5. From the Using drop down menu, select either FTP or TFTP as a medium to update the firmware.
a. Use FTP to get the firmware update from a File Transfer Protocol (FTP) server. A user account must
be established on the FTP server specified for the firmware update.
b. Use TFTP to get the firmware update from a Trivial File Transfer Protocol (TFTP) server.
SWITCH NOTE: On the RFS7000 users can also transfer firmware files using USB or
Compact Flash. On the RFS6000 users can also transfer firmware files using USB.
6. Enter the IP address for the FTP or TFTP server in the
7. Enter the username for FTP server login in the
8. Enter the password for FTP server login in the
9. Enter the complete file path for the file that contains the firmware update in the
10.Click the Do Update button to initiate the update.
A warning prompt displays. Upon confirming the firmware update, the switch reboots and completes the
firmware update.
CAUTION: When restarting or rebooting the switch, the Radius server is restarted
regardless of its state before the reboot.
11.Click OK to add the changes to the running configuration and close the dialog.
12.Refer to the Status field for the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status field displays error messages if something goes wrong
in the transaction between the applet and the switch.
13.Click Cancel to close the dialog without committing updates to the running configuration.
File text field.
IP address field.
User ID field.
Password field.
3-31
Switch Information
Path field.