Printouts - RADWAG UYA 3Y User Manual

mass of each ingredient is automatically recalculated (proportionally) to
the value of defined target mass of the complete formulation,
After accepting mass of an ingredient, the software automatically adds the
•
mass to the sum of weighed ingredients of the formulation, and moves to
weighing the following ingredient,
After weighing all of the ingredients in the formulation, the software sets a
•
command on completing the formula making process,
Press < > key to confirm completing the process. The software
•
automatically prints a report from completed process and saves it in the
database of formulation reports (report template is editable in option
<Printouts>).
Each report from completed formula making processes can be printed from
Database level – reports from formulas.

22.5. Printouts

Option Printouts enables setting the content of printouts in a standard
printout and also determining non-standard printouts.
Standard printout

comprises four internal blocks, each featuring different variables. Each
variable can be attributed with parameter YES – i.e. present on a
printout, or NO – i.e. not printed.
Settings for header printout, weighing printout, and footer printout are
specified in point. 15.5; below description refers to setting a printout
template for report from formulation.
A user can design content of a report.
CAUTION:
Data contained in a report and referring to each measurement is set in
option <Weighing printout template>. On each report printout, areas
dedicated for measurements shall be filled with data with attribute <YES>
in the <Weighing printout template>.
- 90 -