Parameters Related To Working Modes; Quick Access Keys - RADWAG UYA 3Y User Manual

15.2. Parameters related to working modes

Each working mode has programmable parameters determining its
functioning. Procedure of determining these parameters:
1. Press grey coloured workspace area
2. Below menu is displayed:
o <Settings> - additional options related to a mode
o <Keys> - defining quick access keys
o <Information> - selecting information displayed in the workspace
o <Printouts> - selecting type and content of a printout
o <Profile> - selecting a profile, which is active during balance's
operation
3. Press corresponding menu item and select area for modification,
Description of basic parameters accessible in <Settings> tab is provided in
point 10.8 of this user manual "Additional parameters on weighing process".
Other parameters specific to each of working modes are presented in working
modes description.

15.3. Quick access keys

Balance user can define up to 7 quick
access keys, which are displayed in the
bottom bar.
On assigning a function to a specific
key, a corresponding soft key appears,
and it is located in the bottom
navigation bar of the main window.
It is a so called quick access key, dedicated for most often used functions
and processes.
- 51 -