Balances App 3Y Series; Balance Cleaning - RADWAG UYA 3Y User Manual

2.5.

Balances APP 3Y series

Gently take the balance out of its packaging, remove plastic, carton, foil and
transport protections, and gently place the balance in its intended place of use.
2.6.

Balance cleaning

Clean the balance using a damp cloth by gentle rubbing contaminated places.
Remember to remove the weighing pan and its shields from the weighing
chamber before their cleaning.
CAUTION:
Cleaning balance's weighing pan if installed may damage instrument's measuring
mechanism.
After unpacking unscrew bolt 1 which locks the
adjustment mechanism.
Before installing the balance in its intended place
of use, remove transport protections (1) and
assembly the weighing pan (2).
On assembling the components, connect all
peripheral devices to the balance and then plug
the instrument to the mains. Power socket is
located at the back of balance's housing.
On removing the protections and assembling the
weighing pan, connect the terminal to the socket
located at the back of balance's housing, and
connect all peripheral devices. Only then plug the
balance to mains (mains socket is located at the
back of balance's housing).
- 13 -