Table of Contents
Advertisement
SIGNATURE
NSTD. PRNT.
For the parameters described above, one of these values must be selected:
NO
YES
For parameter P5.4.14 select: NONE / NSTD.PRN. 1 / NSTD. PRN. 2 NSTD.PRN.3
/ NSTD. PRN.4
For instruction on entering non-standard printouts read later sections of this user
manual.
Printout example:
14.5
Non-standard printouts
The software enables entering 4 non-standard printouts. Each of them can consist
of approximately 160 characters.
Non-standard printout may include:
Variables depending on the working mode and other needs (mass, date
•
etc.)
Permanent text form the user menu, however only CAPITAL letters shall
•
be used, without Polish characters
Non-standard printout can have approximately 160 characters (typed as a
•
single line)
manual).
Option enables providing an area for the signature of a
user performing the adjustment.
Option enables printing out one of 100 non-standard
printouts on the footer printout. You can choose one of
the following options: NONE / non-standard printout
name. The way of entering non-standard printouts is
described further down this user manual.
- do not print
- print
- 61 -
Advertisement
Table of Contents
